The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

Ya I tried one in my Galaxy 2547 base, after the install I could deadkey anywhere from 2 to 16 watt not sure bout the swing cause i got no PEP meter right now. But I have monster audio now. Very loud modulation and crystal clear. I also installed one in my Texas Ranger 396 with similar results. I gu...

Does anyone have any plans they could upload, or a link to a cheap reliable dipole antenna suitable for CB. A few years back I remeber the boys built some from copper pipe and antenna wire standoffs mounted to a 2x4. What I'm looking for is the length of the 2 pipes and gap between them. any pics or...

hey i found a little tin box filled with wax and guess what i was dumb enough to try digging the wax out with the radio on, and bam more RX audio vol, so i kept playin and found a cold solder joint under the wax now everything works fine lol tks for all the help.

Yes there is RX audio,No there are no working LEDs on the bargraph . Which leg on the transistors do i check for voltage, on collector emitter or base?What should i see for Volts? If the voltage is lower than normal should i replace transistors Q506 and 505? Thanks.

I checked and there is no audible audio in PA mode with vol wide open. It doesnt even feedback the only thing i got is rx!

Hi guys , I recently aquired an old realistic trc-423 mobile I have tried everything to get this old set to key up. I have re-wired the mic end and tested mic with ohmmeter everything in mic is ok, it worked on another set. So I tried jumping the tx pin directly on the radio with no results no tx li...

hello all, cant wait to dive in the forums great site guys.