Search found 29 matches
- Sunday 27th Oct 2019, 11:14
- Forum: CB Radio General
- Topic: Is there anyone out there
- Replies: 4
- Views: 10410
Re: Is there anyone out there
This is a great site as well but in northern ireland cb radio is making a comeback so hopefully it will get busy again many thanks for replying
- Sunday 27th Oct 2019, 11:13
- Forum: CB Radio General
- Topic: Is there anyone out there
- Replies: 4
- Views: 10410
Re: Is there anyone out there
This is a great site as well but in northern ireland cb radio is making a comeback so hopefully it will get busy again many thanks for relaying
- Sunday 27th Oct 2019, 6:50
- Forum: CB Radio General
- Topic: Is there anyone out there
- Replies: 4
- Views: 10410
Is there anyone out there
Iv looked through this forum and it seems like no one is replying any more I just want to know is this a dead site
- Sunday 27th Oct 2019, 5:07
- Forum: CB Radio Repair and Troubleshooting
- Topic: Stocker 9 fdx schematic
- Replies: 0
- Views: 11046
Stocker 9 fdx schematic
Hi has anyone have the schematic for a teaberry stocker 9 ix? there is a voltage requlator in this set that isn't factory, its right beside the audio ic, even if someone could possibly give me the number of this component so I can return this set back to factory many thanks for any help
- Sunday 22nd Aug 2010, 11:38
- Forum: CB Radio Modifications
- Topic: nato 2000
- Replies: 2
- Views: 5928
nato 2000
hi can anyone tell me how to change the n/b switch to set the rig up for zeros exp 27.560 it would be a lot better that using the kc jump switch regards philip
- Friday 25th Jun 2010, 11:47
- Forum: CB Radio Repair and Troubleshooting
- Topic: intek m550 power echo
- Replies: 0
- Views: 4899
intek m550 power echo
Radio Make and Model: intek m550 power PCB Number: PLL Number: Test gear available: Symptoms: echo is to fast What is working: What has been tried: radio works good Did it suddenly happen ?: Anything else that may be of help?: the radio works well but the echo is to fast, people does not know what i...
- Saturday 27th Feb 2010, 9:29
- Forum: CB Radio Amplifiers
- Topic: RM KL200 distortion
- Replies: 6
- Views: 12214
Re: RM KL200 distortion
yes i do have a small 12v battery charger on this battery and this battery is for a diesel car so the ampage is more than enough for this burner,,i am thinkin maybe i am putting to much power into this burner, but my set only puts out 6 watts on ssb which should be low enough to drive this burner, i...
- Thursday 25th Feb 2010, 8:26
- Forum: CB Radio Amplifiers
- Topic: RM KL200 distortion
- Replies: 6
- Views: 12214
Re: RM KL200 distortion
How are you animal, at the minute i am using a car battery to power my amp and my swr is at a 1.2 without it and 1.4 with it , but i have been getting bad reports with it, not sure whats going on with it i had to fix a risister in it one day when the legs of it came free of the pcb but snice it has ...
- Saturday 9th Jan 2010, 13:21
- Forum: CB Radio Repair and Troubleshooting
- Topic: help ranger ar 3500 only 4 watts on ssb
- Replies: 7
- Views: 10569
Re: ranger ar 3500 only 4 watts on ssb
Sorry for that, but checkout these two things and then you see more. If the diodes are blown there is a reason, but you can experimentally exchange them with 1N4148 or 1N4001. Then you can make more messurments, before trying to geht those MV1Y, which will be hard to find... thats ok joerg but i ha...
- Saturday 9th Jan 2010, 12:56
- Forum: CB Radio Repair and Troubleshooting
- Topic: help ranger ar 3500 only 4 watts on ssb
- Replies: 7
- Views: 10569
Re: ranger ar 3500 only 4 watts on ssb
Hi, must say, I don't know the ar 3500, just read the shematic I found on the web. The SB 754 (Q35) must be a big one, screwed to the chassis with the upper edges cut off at 45 degrees. Normally it is not very far away from your power-inlet. I it is the one, you can change it to the higher-rated BD...
- Saturday 9th Jan 2010, 11:08
- Forum: CB Radio Repair and Troubleshooting
- Topic: help ranger ar 3500 only 4 watts on ssb
- Replies: 7
- Views: 10569
Re: ranger ar 3500 only 4 watts on ssb
it was the dealers seal from 1992 when this set was new and it is the 30 watt set thanks for your help but you were right about the set being at a low setting i turned up the ssb mod vr and now i am putting out 10 watts which is good for me then i can still use my 200 watt linear which can only tak...
- Saturday 9th Jan 2010, 0:39
- Forum: CB Radio Repair and Troubleshooting
- Topic: help ranger ar 3500 only 4 watts on ssb
- Replies: 7
- Views: 10569
Re: ranger ar 3500 only 4 watts on ssb
it was the dealers seal from 1992 when this set was new and it is the 30 watt set thanks for your help but you were right about the set being at a low setting i turned up the ssb mod vr and now i am putting out 10 watts which is good for me then i can still use my 200 watt linear which can only take...
- Saturday 2nd Jan 2010, 11:46
- Forum: CB Radio Repair and Troubleshooting
- Topic: help ranger ar 3500 only 4 watts on ssb
- Replies: 7
- Views: 10569
help ranger ar 3500 only 4 watts on ssb
Radio Make and Model: ranger ar 3500 PCB Number: PLL Number: Test gear available: test meter dummy load power meter Symptoms: What is working: thew set is good in every other way What has been tried: nothing yet the lid has never been off this set Did it suddenly happen ?: always was like this Anyth...
- Monday 21st Dec 2009, 11:58
- Forum: Shout Outs
- Topic: wishing everyone a merry xmas and a happy new year
- Replies: 1
- Views: 6126
wishing everyone a merry xmas and a happy new year
hope everyone will have a good year and happy cbing
- Monday 14th Dec 2009, 12:26
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx off frequency
- Replies: 3
- Views: 7612
Re: stalker 9 dx off frequency
oh dear i have a 6 digit counter and i am still not sure dave is it vr 6 or does all these parts need adjusted to bring it back on freq many thanks for your help philipzodiac wrote:Philip,
This might help you put it back on frequency but only if you have a 7 digit counter.
- Monday 14th Dec 2009, 11:26
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx off frequency
- Replies: 3
- Views: 7612
stalker 9 dx off frequency
Radio Make and Model: stalker 9 dx PCB Number: pc-893aa PLL Number: Test gear available: test meter, freq counter, dummy load Symptoms: What is working: everything works 100% What has been tried: nothing yet Did it suddenly happen ?: always was like this Anything else that may be of help?: my stalke...
- Sunday 6th Dec 2009, 11:07
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
thanks dave ill check it out nowzodiac wrote:Phil,
You have a PM.
Dave.
- Saturday 5th Dec 2009, 6:39
- Forum: CB Antenna Systems
- Topic: Predator antenna tuning problem
- Replies: 1
- Views: 5698
Re: Predator antenna tuning problem
I have a Predator 10k antenna mounted (Breedlove mount) to the front bed rail of my Ford F250 pickup. Cannot get it tuned below the red; always above 3, on all channels. Continuity tests are ok. Using Galaxy 959 radio, tuned. Any recommendations? How can I be certain the antenna mount is grounded? ...
- Friday 4th Dec 2009, 10:04
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
These are the voltages on the audio chip pins starting at the back of the radio in FM mode. 13.5 12.3 7.0 0.9 2.11 2.9 0.9 i done those checks and mine does not look the same, and the sq does nothing when you turn the switch up 13.7 12.4 4.85 0.02 5.76 7.21 4.54 i think going with these checks that...
- Friday 4th Dec 2009, 9:13
- Forum: CB Radio General
- Topic: DON'T LET THIS SITE DIE!
- Replies: 5
- Views: 11557
Re: DON'T LET THIS SITE DIE!
this is one of the best sites i have seen, and i log on every day and i will keep posting on until i cant type anymore its a great place to hang out and get your cb radio troubles fixed , whoever made this site up is brill =D> AND EVERYONE KEEP POSTING TO KEEP IT GOING so that people in the future c...
- Friday 4th Dec 2009, 8:55
- Forum: CB Radio Amplifiers
- Topic: RM KL200 distortion
- Replies: 6
- Views: 12214
RM KL200 distortion
I GOT THIS AMP SECONDHAND but it seems to distort the modulation when i am using it on ssb i am getting bad reports with it switched on, when i first got this amp i was using it on fm ( i forgot to switch amp off after dxing on ssb) and the resistor (R9) melted the solder and one leg off the resisto...
- Saturday 28th Nov 2009, 7:17
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
These are the voltages on the audio chip pins starting at the back of the radio in FM mode. 13.5 12.3 7.0 0.9 2.11 2.9 0.9 i done those checks and mine does not look the same, and the sq does nothing when you turn the switch up 13.7 12.4 4.85 0.02 5.76 7.21 4.54 i think going with these checks that...
- Saturday 28th Nov 2009, 0:50
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
was wondering if there was a part where i could disconnect the sq just to see if it was it, thats causeing my trouble .thanks philip.zodiac wrote:Yes it would mute the audio.
- Friday 27th Nov 2009, 11:05
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
Yes, It's on the schematic above, UPC1182H. Thanks dave i should had seen that :doh: many thanks philip hi dave i have just noticed that i have power to the speaker 0.07v and when i switch the rig on; the speaker sounds as it would when i power up the rig, would a squelch malfuncion cut the audio t...
- Thursday 26th Nov 2009, 11:51
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
Thanks dave i should had seen that many thanks philipzodiac wrote:Yes,
It's on the schematic above, UPC1182H.
- Wednesday 25th Nov 2009, 7:47
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
If you have any problems getting a new audio chip KCB (Knights)in the UK have them. That's what happens when the radios been cross poled as well, It's the first IC to go pop when the idiot diode fails. Dave. yes the diode at the back of the set is blown and some guy has solderd a replacement onto t...
- Wednesday 25th Nov 2009, 1:05
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
If you have any problems getting a new audio chip KCB (Knights)in the UK have them. That's what happens when the radios been cross poled as well, It's the first IC to go pop when the idiot diode fails. Dave. yes the diode at the back of the set is blown and some guy has solderd a replacement onto t...
- Tuesday 24th Nov 2009, 14:30
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
Re: stalker 9 dx no audio from speaker
Does the audio work on PA ?. If not then check C159, 10v @330uF and C161, 10v @47uF, better still change both for 16v capacitors at the same uF value. IC507 is the audio chip. Dave. ST9 FDX audio.JPG Thanks very much for your help) i done those checks c159 and c161 all checks out, i done checks wit...
- Monday 23rd Nov 2009, 8:24
- Forum: CB Radio Repair and Troubleshooting
- Topic: stalker 9 dx no audio from speaker
- Replies: 16
- Views: 21725
stalker 9 dx no audio from speaker
Radio Make and Model: stalker 9 dx PCB Number: pc-893aa PLL Number: not sure can find it on set Test gear available: test meter Symptoms: no sound from the speaker What is working: everything checks out What has been tried: done some circit tests Did it suddenly happen ?: yes when i was talking to a...