Search found 10 matches

by ronjr1177@yahoo.com
Thursday 12th Dec 2013, 12:59
Forum: CB Radio Repair and Troubleshooting
Topic: NO RX AUDIO
Replies: 1
Views: 3595

Re: NO RX AUDIO

WAS A BAD SQUELCH POT
by ronjr1177@yahoo.com
Tuesday 10th Dec 2013, 15:21
Forum: CB Radio Repair and Troubleshooting
Topic: NO RX AUDIO
Replies: 1
Views: 3595

NO RX AUDIO

Radio Make and Model: COBRA 29XLR PCB Number: PC-241AB PLL Number: UPD858 Test gear available: PDC 600 METERS,MULTIMETER/TESTER Symptoms: NO RECEIVE AUDIO,TX AUDIO AND PA WORK FINE,ALSO I SEE SIGNALS ON METER IT IS RECEIVEING What is working: ALL BUT RX AUDIO What has been tried: NEW AUDIO AMP,DIFFR...
by ronjr1177@yahoo.com
Tuesday 26th Nov 2013, 14:53
Forum: CB Radio Modifications
Topic: RFX75 install instructions
Replies: 1
Views: 3184

RFX75 install instructions

Does anyone know where I can find rfx75 install instructions for galaxy 979,i see the 979 is similar to 959 but different enough for problems on right side rear connections like jp97 that is non exsistant in 979...
by ronjr1177@yahoo.com
Wednesday 30th Oct 2013, 13:06
Forum: CB Radio Repair and Troubleshooting
Topic: GALAXY SATURN 2 MOBILE AM/FM DRIFT AROUND
Replies: 0
Views: 6735

GALAXY SATURN 2 MOBILE AM/FM DRIFT AROUND

Radio Make and Model: GALAXY SATURN2 PCB Number: 360014B PLL Number: Test gear available: PDC 600 METER,DOSY FREQ COUNTER,MULTIMETER Symptoms: DRIFTS AROUND ON AM/FM JUMPING FROM 24 TO 29MHZ What is working: SSB WORKING FINE What has been tried: OPENED UP LOOKED FOR LOOSE WIRES,PARTS,ANY DAMAGED LOO...
by ronjr1177@yahoo.com
Tuesday 15th Oct 2013, 9:21
Forum: CB Radio Repair and Troubleshooting
Topic: Cobra 29XLR NO TX
Replies: 4
Views: 4981

Re: Cobra 29XLR NO TX

Tried changing tr8 and still nothing,going back in circuit and test more components.
by ronjr1177@yahoo.com
Monday 14th Oct 2013, 15:18
Forum: CB Radio Repair and Troubleshooting
Topic: Cobra 29XLR NO TX
Replies: 4
Views: 4981

Re: Cobra 29XLR NO TX

Yes it goes into transmit and you can hear a slight high pitched squeal,i am going to try changing tr8 from parts radio will get back to you..
by ronjr1177@yahoo.com
Thursday 10th Oct 2013, 14:06
Forum: CB Radio Repair and Troubleshooting
Topic: Cobra 29XLR NO TX
Replies: 4
Views: 4981

Cobra 29XLR NO TX

Radio Make and Model: cobra 29xlr PCB Number: uniden PLL Number: upd858 Test gear available: radioshack test/pwr meter fluke multi tester Symptoms: no transmit What is working: everything but transmit What has been tried: relaced driver and final with new,test tr8 test good,tx alingnment/tweak tx co...
by ronjr1177@yahoo.com
Tuesday 8th Mar 2011, 12:28
Forum: CB Radio Repair and Troubleshooting
Topic: galaxy44v am receive faint and motorboating
Replies: 5
Views: 4446

Re: galaxy44v am receive faint and motorboating

Thanks, 2 coilcans next to crystals for the am receive were 2.5 turns in to far and causeing the problem.No one said anything to me about any screwdrivers being in this thing before but evedently there was. I realigned the whole radio and it now works fine..Thanks again,never go by what some folks t...
by ronjr1177@yahoo.com
Sunday 9th Jan 2011, 10:57
Forum: CB Radio Repair and Troubleshooting
Topic: galaxy44v am receive faint and motorboating
Replies: 5
Views: 4446

Re: galaxy44v am receive faint and motorboating

Thanks,I changed all these parts as to take no chances on future failure with new as galaxy site said would be probable cause..C49 ,C32,C17,Changed R121 to 1K ,R190,All receive issue parts related to my problem that was said to cure the problem and didnt.Still have same problem.If there are any othe...
by ronjr1177@yahoo.com
Tuesday 4th Jan 2011, 13:07
Forum: CB Radio Repair and Troubleshooting
Topic: galaxy44v am receive faint and motorboating
Replies: 5
Views: 4446

galaxy44v am receive faint and motorboating

Radio Make and Model:malaysian galaxy 44v PCB Number: ept360014b PLL Number: mc145106p Test gear available: dosy 3001, vom, basic handtools Symptoms: am receive very faint and making motor boat sound What is working: fm receive and tx in am and fm working fine What has been tried:looked for obvious ...

Go to advanced search