Search found 105 matches

by StrightClaw
Saturday 5th Nov 2016, 22:49
Forum: CB Radio Repair and Troubleshooting
Topic: Channel numbers don't match frequencies
Replies: 0
Views: 12863

Channel numbers don't match frequencies

My Texas Ranger Base 696 SSB has went haywire. I don't know when it happened as I most of the time are on channel 8. Anyhow I was flipping channels around, and found out there all screwed up. Here's what I have. Channels 1,5,6,7,8,12,13,14,18,19,20,26,27,28,33,34,and 35 are all normal and in place. ...
by StrightClaw
Friday 26th Aug 2016, 22:15
Forum: CB Radio General
Topic: Rick ????? Where are you ?
Replies: 0
Views: 10845

Rick ????? Where are you ?

What ever happened to Rick ?????????
by StrightClaw
Friday 26th Aug 2016, 22:01
Forum: CB Radio Repair and Troubleshooting
Topic: Texas Ranger696 mobile nothing
Replies: 0
Views: 11515

Texas Ranger696 mobile nothing

I have this Texas Ranger 696 I took out of the closet today. It's been down for quite a while now but it's just to far to take anything to be repaired. The Base station I had listed here Texas Ranger 696 SSB base I took it the other day it's 100 miles to the shop what a trip. Anyhow it cost me $93.0...
by StrightClaw
Tuesday 23rd Aug 2016, 21:19
Forum: CB Radio Repair and Troubleshooting
Topic: Texas Ranger696 Base No sound
Replies: 2
Views: 7193

Re: Texas Ranger696 Base No sound

Thanks Giboni
by StrightClaw
Tuesday 16th Aug 2016, 23:13
Forum: CB Radio Repair and Troubleshooting
Topic: Texas Ranger696 Base No sound
Replies: 2
Views: 7193

Texas Ranger696 Base No sound

Texas ranger 696 SSB base PCB EPT069610Z PLL ? Symptom are no sound at all RX/PA/Talkback nothing I have movement from my RX needle and have confirmed this while talking over the phone to a fellow CBer. I also have good TX I have looked inside the radio for any lose wiring or disconnected wires but ...
by StrightClaw
Friday 12th Jul 2013, 21:01
Forum: CB Radio Repair and Troubleshooting
Topic: Texas Ranger 696 ssb no rx
Replies: 0
Views: 12122

Texas Ranger 696 ssb no rx

Radio Make and Model: Texas Ranger 696 SSB PCB Number: EPT069610z PLL Number: Cant find if someone can help with where to look Thanks Test gear available: Ohm Volt Meter Symptoms: Radio doen't recieve AM SSB or Weather or have any needle movement. Also no Talkback or PA What is working: Transmitt is...
by StrightClaw
Thursday 20th Nov 2008, 23:21
Forum: CB Radio Modifications
Topic: Echo Board with no Externat Knobs ?
Replies: 2
Views: 5543

Echo Board with no Externat Knobs ?

I bought an echo board a year or so ago and it was made so you could unplug the outside adjusting Pots and plug in small replacements this got rid of the gob of wires you have to stuff in the radio if you dont want to mess with the radio outside.I can't for the life of me remember the name I'd like ...
by StrightClaw
Thursday 17th Apr 2008, 23:16
Forum: CB Radio Repair and Troubleshooting
Topic: Cobra 29 no modulation on transmitt
Replies: 2
Views: 5320

Rick I checked everything and hit the solder joints around everything and my tx modulation came back. You are the MAN Rick Thanks for your help.As always you had the answer Thanks Again!
by StrightClaw
Thursday 17th Apr 2008, 12:03
Forum: CB Radio Repair and Troubleshooting
Topic: Cobra 29 no modulation on transmitt
Replies: 2
Views: 5320

Cobra 29 no modulation on transmitt

I was talking on my 29 and out of no where the modulation just went out.Anyone know what I need to check?
by StrightClaw
Monday 7th Apr 2008, 22:35
Forum: CB Radio Modifications
Topic: Mod ID
Replies: 1
Views: 4542

youll find ALL of the mod here htt://www.714xpress.net/714mods1.html#a among other places.
by StrightClaw
Monday 7th Apr 2008, 22:25
Forum: CB Radio Modifications
Topic: 2sc2999 and Schottky diode swap
Replies: 22
Views: 141769

I agree with Rick I tried this on my Ranger Moble and it seems about the same to me. Its not realy worth the effort.
by StrightClaw
Monday 7th Apr 2008, 22:13
Forum: CB Radio Modifications
Topic: Cobra 29 should I jump D8 ?
Replies: 4
Views: 8304

Cobra 29 should I jump D8 ?

i ran across a mod that says to jump D8 what does this do to the radio ? also i have seen schematics which have the number of D8 penciled in as 1N4003 does changing it from 1n4004 to 1n4003 do something ?
by StrightClaw
Monday 31st Mar 2008, 10:24
Forum: CB Radio Modifications
Topic: uk cobra 29 LTD ST ouptput mod fm
Replies: 6
Views: 9972

try this link follow the cobra mod http://www.714xpress.net/714mods1.html#a if you dont get result I don't think (Rick) here would mind asking for help. He's realy good at what he does and a Great GUY.
by StrightClaw
Sunday 30th Mar 2008, 23:56
Forum: CB Radio Modifications
Topic: Mod for Higher Dead Key With Cobra After ERF 2030 mod
Replies: 5
Views: 10798

Mod for Higher Dead Key With Cobra After ERF 2030 mod

I ran across this on another forum and found it to work realy good for the Cobra 29.It may be of use to some. Add a 1/4 watt 4.7 ohm resistor from the + side of C116 to the gate of the 2030 this is the left leg looking at the face of it. Replace C62 with a 390 PF Cap. The post suggest to jump D8 but...
by StrightClaw
Sunday 9th Mar 2008, 0:09
Forum: Wanted !
Topic: Blue Channel Display
Replies: 1
Views: 5048

Blue Channel Display

anyone know where i can get a Blue Channel Display for a Galaxy Melaka there just a tad bigger than those being sold that ive seen
by StrightClaw
Monday 14th Jan 2008, 22:57
Forum: CB Radio General
Topic: Static when key is on engin is not running help.
Replies: 3
Views: 7416

If this is comming in through the power and not the antenna you may want to try this http://n4maa.us/alternator.htm I found it to work on several different interferences.
by StrightClaw
Monday 14th Jan 2008, 22:46
Forum: CB Radio General
Topic: Calibrating watt,SWR modulation meters ?
Replies: 1
Views: 5779

Calibrating watt,SWR modulation meters ?

Can someone tell me is there a way to calibrate these myself. I have a PDC 700 and a PDC 600. I think the 700 is OK but the 600 seems off id like to be able to check them both if there is a way to do this.
by StrightClaw
Saturday 5th Jan 2008, 13:00
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

So everyone will know. The problem with the Melaka turned out to be a bad Driver. This was a new Driver and checks OK on ny transistor checker??? Oh well live and learn. I just wanted to thank everyone for there help. And Rick for hanging in there.You don't give up your the best How lucky we are to ...
by StrightClaw
Wednesday 26th Dec 2007, 11:44
Forum: CB Radio General
Topic: CB Tricks Whats up over their ?
Replies: 2
Views: 7575

Thanks Rick I been wondering about it. It's one of the best for info. It would be bad not to have it, and be missing this fourm. Guys like you would realy be missed.

Hope you have enjoyed this Holiday Season
by StrightClaw
Wednesday 26th Dec 2007, 8:46
Forum: CB Radio General
Topic: CB Tricks Whats up over their ?
Replies: 2
Views: 7575

CB Tricks Whats up over their ?

anyone know whats wrong with the web site ?
by StrightClaw
Wednesday 26th Dec 2007, 6:18
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

No doubt about it.
by StrightClaw
Wednesday 26th Dec 2007, 5:27
Forum: CB Radio Repair and Troubleshooting
Topic: wishing everyone merry xmas
Replies: 2
Views: 5371

The best of wishes to all here on the forum. Many thanks to ramblingman for this post and all the help, and to Rick who we should all be thankful to.

A MERRY MERRY CHRISTMAS to all and God Bless.
by StrightClaw
Monday 24th Dec 2007, 7:16
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Im not realy sure just how to do that.The radio doesnt have a plug to the rear for mobile use.I have a hot and ground on the board I can tap into but there are other wires coming off the supply that go to the front of the radio .Not sure what these are. I dont understand I have traced the power up t...
by StrightClaw
Monday 24th Dec 2007, 4:27
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Thanks Rick
Ill see if I can locate a new final tomorrow and Ill be sure to check the board.

Thanks again.
by StrightClaw
Monday 24th Dec 2007, 1:14
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

I have a Transistor Checker and the Driver and Final Check OK. I dont know anything about the Radio. The guy I bought it from said the Final went out. As it turned out it was TR-51 that was bad. Seems someone had the Power supply turned up.Everything Iv'e went through is in my post.Im not much of a ...
by StrightClaw
Sunday 23rd Dec 2007, 11:27
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

I found a pot for the supply and set it to 13.87 volts. Close enough ?
by StrightClaw
Sunday 23rd Dec 2007, 10:55
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Rick I made a mistake the Volts I gave you for TR-51 were reading I wrote down and were taken from TR-41
TR-51 E=16.03 C=5.60 B=15.42
by StrightClaw
Sunday 23rd Dec 2007, 10:48
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

power supply 16.12 volts
by StrightClaw
Sunday 23rd Dec 2007, 10:07
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Rick
I was speeking of TR-51 the power seems high to me but I dont know.
TR-51 at TX E=15.85 C=8.68 B=15.12
TR-46 at TX E=.85 C=5.90 B= 1.48
TR-45 at TX E.84 C=8.48 B=1.43
TR-44 at TX C=5.59 B=.63
TR-43 at TX C=5.52 B.55
by StrightClaw
Sunday 23rd Dec 2007, 8:55
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

I found out my V meter battery was weak. my V is the same now.i just dont have but .5 watts? you were right on about the power its running up to 16 volts at TR-51
by StrightClaw
Sunday 23rd Dec 2007, 7:00
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Rick I did reset the collector v at TR 51 I dont think the power is bad. I will look close at other joints and the pc board.
Thanks again Rick
by StrightClaw
Sunday 23rd Dec 2007, 6:38
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

I touched up a few solder joints around the driver and final I now have about .5 watts on my RF meter.
TR44 RX B=0.00 C=5.97
TR44 TX B =.66 C =3.77

TR43 RX B=0.00 C=6.00
TR43 TX B=.45 C=1.38

Rick I realy appericate your help with this
by StrightClaw
Saturday 22nd Dec 2007, 13:39
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Sorry Rick R223 has 8.92 and 6.38 volts I miss understood. Tr45 should be correct emitter is connected to R220
by StrightClaw
Saturday 22nd Dec 2007, 13:17
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

I replaced TR-45 with a NTE293 didn't have a replacement. TR-45 was a 2sc1973 I now have a new 2sc1973 I can install.
Also R223 has 0.00volts each side.
by StrightClaw
Saturday 22nd Dec 2007, 12:14
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Rick

Pin 5 of IC-9 8.21Volts
Each side of R233 .01Volts
TR-46 at TX B=1.49 C6.05 E.75
by StrightClaw
Saturday 22nd Dec 2007, 9:11
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

ramblingman I replaced TR-45 earlier

Rick
I turned up 13 and now have 5.60 volts at TR-51 under TX AM and FM
TR- 45 TX is C=5.59V and B=1.14V
TR-44 TX is C=5.30V and B=.59V
TR-43 TX is C=5.60V and B=.52V

no transmitt

looking to hear back and Thanks!
by StrightClaw
Monday 17th Dec 2007, 10:38
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Rick

I work out of town but when I get back at the end of the week Ill be sure to follow up.

Thanks Rick
by StrightClaw
Monday 17th Dec 2007, 2:20
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Yes ramblingman the ON THE AIR lights up and you can hear the switch from RX to TX. And Rick I don't think anyone thinks your butting in.I think everyone here should apericate the help you give. I know I do. Anyhow the Voltages are like so. TR-51 Collector at transmitt AM= 3.51, FM=3.50 TR-45 Base a...
by StrightClaw
Sunday 16th Dec 2007, 9:16
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

I can take a short pice of wire and touch the base and collector of each the driver and then the final. Doing this with another radio tuned to the same channel and close by.Watching the receive meter.The driver acts as it should the base seems to emmit a little less RF than the collector which I bel...
by StrightClaw
Friday 14th Dec 2007, 11:53
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Well I replaced TR-51 and the Final and the Driver but still no transmitt. Is there something that could have gone short when TR-51 went out.
by StrightClaw
Monday 10th Dec 2007, 9:24
Forum: CB Radio Repair and Troubleshooting
Topic: Radio Swishing noise
Replies: 9
Views: 11423

GOOD NEWS I have found the source of my noise. A cordless Drill Battery Charger. It has a little light that blinks when its charging and as it blinks my radio has the swishing sound. The strange thing is it only does it when the charger is out in my Garage. If I plug it in, here in the house it's ok...
by StrightClaw
Monday 10th Dec 2007, 7:04
Forum: CB Radio Repair and Troubleshooting
Topic: Radio Swishing noise
Replies: 9
Views: 11423

I have found out that it's at times on 40 29 31 and so on at the same time. And then it's on other channels at different times.I don't get it.
by StrightClaw
Monday 10th Dec 2007, 0:25
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

good idea ramblingman Thanks I think Ill do that
by StrightClaw
Monday 10th Dec 2007, 0:22
Forum: CB Radio Repair and Troubleshooting
Topic: Radio Swishing noise
Replies: 9
Views: 11423

A strange thing I found out this morning about this noise. I run channel 40 I don't have the noise right now but it's down on channel 29 strange. I think Ill keep an eye everyday and see if it's moving around.
by StrightClaw
Sunday 9th Dec 2007, 23:15
Forum: CB Radio Repair and Troubleshooting
Topic: Radio Swishing noise
Replies: 9
Views: 11423

Thanks! Scott I hope it's not something like that but your right could be.
by StrightClaw
Sunday 9th Dec 2007, 12:41
Forum: CB Radio Repair and Troubleshooting
Topic: Radio Swishing noise
Replies: 9
Views: 11423

I have the same problem in my mobile sitting in the drive. I turned the power off at the main but still get the noise. It's at different times of the day also.Or night. But thanks for you input pitbikeman
by StrightClaw
Sunday 9th Dec 2007, 11:48
Forum: CB Radio Repair and Troubleshooting
Topic: Radio Swishing noise
Replies: 9
Views: 11423

Radio Swishing noise

This may not be the section to ask this question but Ill ask anyway.I have a swishing noise that I have to deal with about half the time Im on my radio.It's pulsating like a radar is turning nearby. It's prety fast though. To fast to be that.I dont think it's off the power lins. I just don't have an...
by StrightClaw
Sunday 9th Dec 2007, 1:10
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

ramblingman you were right on the 2sa1012 is bad Ill get a replacement monday Thanks again for the help.
by StrightClaw
Saturday 8th Dec 2007, 12:30
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

thanks ramblingman and I agree Rick is a good guy and all kinds of help
by StrightClaw
Saturday 8th Dec 2007, 11:11
Forum: CB Radio Repair and Troubleshooting
Topic: Galaxy Melaka no transmitt
Replies: 42
Views: 52383

Galaxy Melaka no transmitt

Anyone know where I can get a schematic for the Melaka. The radio receives fine but no transmitt I replaced the final and the driver but it's still the same.