The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

Thanks again tim. I owe you one. I wont forget you. I know you spent time on this. Man what an adventure. Best to you again.................John...........

Hi Tim, Well The results are in.......................It worked. I suspected you were an amp builder. No more Chattering. Man that was music to my ears, Hahaha. Yoyu are the best. Went to other forums and no one could explain how to cure the symptom. Listen just wondering, I dont have my meters for ...

Thanks Tim, Just got back. Picked up some parts from the shack and the rest from Frys electronics. Thank you for sticking it out through with me. Im getting ready to assemble the project. Then will take a ride to the towers. Keep you posted like usually. Thank you Tim..........................John. :)

Got it there Tim. I live not even 10 minutes away From The Shack. I'll pick up the parts tomorrow. Will keep you posted on the results.You're Very Astute. Thanks a bunch again. Hey Tim Have a great weekend. I will keep you up to date on the progress..............................John........ :wink: C...

At what watt rating should be satisfactory for the Resistor, Also for the 15 pf Thanks . Im going to the shack and pick these items. Afterwards will try it in and up the towers to see what happens. Hey Thanks Tim. Appreciate you being with me on this adventure. Hahaha, Im keeping my fingers crossed....

Thanks TimRim for letting me pick your brain there. I will try the combination that you will send me. Patiently awaiting your message................................John. And will let you know of my Results........

by the way the transistor is ST WFS748 China TIP 31A

My Digital camera is Junk. So Traced it out on pencil and drew it for you . Please let me know if you can understand writing. Thanks................... :roll Hey they wont let me upload. Can I email it to you please..........I dont understand why Im being limited to 5 mb.........My Email is Thanks.....

Ok ill try and get another pic if The forum allows me. Usually only 5 mb. Let me try. If not i will post it again tomorrow. But will try tonight. Thanks man..........

Hey Thanks Rick. I appreciate the Info.......................John.....................

I had a 3rd pic but it limited me to only 5 megabytes........Hope these shine some Idea. I can also be your eyes if needed.................Thanks again.............................John...........

here is another

Here are the pics. Couldnt get to the bottom of the board to show you the trace. Its a pain to get to.......So what do you think

Hi Ham Guy. I heard that this Transistor has a quieter floor noise. A built in filter to eliminate the hash and trash while allowing just the clean transmitting signal to come in .

I WILL POST PICS SOON. THANK YOU. PLEASE STAY WITH ME ON THIS.

Hi, Thanks for replying really quick. We dont have a schematic but if you want i can take a picture of what it looks like where the keying relay is with surrounding components . Will this help. The cable that is being used is The gray RG8mini cable. From radio to amp. And from amp to antenna. Swr is...

A friend has an amplifier that is a 2 pill driving an 8 pill. The problem is that when he goes up on the hill Perhaps next to the towers his Relay start to chatter or buzz. This also happens if he drives by the police stations. I believe the transmissions from the beacons are causing this chatter. o...

Hey Rick or Carl if i did this mod on my ranger 2950 old school Non DX radio will i have to align the receiver or is it a plug and solder deal. PleAse let me know. Im actually doing this mod in about a week from today.......

Hi Im planing on doing this mod to my Ranger RCI 2950 old school non DX ,Placing a 2sc2999 Transistor that replaces the RF Amp Trans and four Schottky diodes that replace the RX diodes and the NB/ANL Diodes. This is said to quiets the receive while giving you up to 6DB of receiver gain. Just wonderi...