need help with microphone wiring ??
- belfiglioval
- Dead Key
- Posts: 22
- Joined: Tuesday 25th Sep 2007, 11:31
- Location: oklahoma city
need help with microphone wiring ??
i have a astatic D-104 table mic, with a four pin connecter, i am changing it to a five pin so i can use it on my cobra 2000 GTL, there are six wires for this microphone, blue, white, green, red, brown, shield, i cant find any info for a mic this old, thanks.
-
- Technical Helper
- Posts: 331
- Joined: Sunday 21st Jan 2007, 16:35
- Location: mississippi
hello,,the white wire should be the audio wire,the red wire should be the transmit wire,the brown wire should be the recieve wire,the blue wire is you switch wire..for 5 pin common,should be as follows..pin 1 is the audio wire or white wire.pin 2 is the shield wire.pin 3 is the recieve wire or brown wire..pin 4 is the common or switch wire or blue wire..pin 5 is the transmit wire or the red wire............ramblingman p.s...your other two wire are non connect
belfiglioval, have a look at this link. Might be useful.
http://www.cbcintl.com/docs/mikewire.htm
cheers
Paul.
http://www.cbcintl.com/docs/mikewire.htm
cheers
Paul.