Uniden pc 68xl

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
1096
Dead Key
Dead Key
Posts: 27
Joined: Wednesday 16th Jul 2008, 8:10
Location: ct

Uniden pc 68xl

Post by 1096 »

Radio Make and Model: Uniden pc 68xl
PCB Number:
PLL Number:
Test gear available: Bird 43p, O'scope, mutlimeters, freq. counter, signal generator....
Symptoms: Lost transmit.... Keyup

What is working: Tx/Rx light changes color, receive works....

What has been tried: Changed Q9, Q19, final, driver, D12, IC2 and IC3....

Did it suddenly happen ?: yes

Anything else that may be of help?:
If I lift one end of D12 the transmit comes back but at only around half power.... I replaced D12 and it made not difference.... Checked R60, R70, R47, R46, R108.... Everything seems to check out but I still have no keyup with D12 soldered in place.... Radio keys with one leg lifted on D12 and only half power as previously stated.... This thing is driving me nuts and I know I'm overlooking somethng simple because I'm frustrated.... Any Ideas????
1096
Dead Key
Dead Key
Posts: 27
Joined: Wednesday 16th Jul 2008, 8:10
Location: ct

Re: Uniden pc 68xl

Post by 1096 »

Anyone???
Sci_Fi
Newbie
Newbie
Posts: 7
Joined: Friday 25th Sep 2009, 16:08
First Name: kc
Location: Fort Collins, Co

Re: Uniden pc 68xl

Post by Sci_Fi »

dono if this helps, but i found some useful answers on this site. type in the search...
http://www.fixya.com/support/t3029336-c ... t_in_truck
Post Reply