Cobra 150 gtl distortion on high power.

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
User avatar
speedracer6g
Light User
Light User
Posts: 165
Joined: Saturday 23rd Feb 2008, 13:35
First Name: Michael
Location: East Freedom, PA
Contact:

Cobra 150 gtl distortion on high power.

Post by speedracer6g »

Cobra 150 gtl

The radio works fine on low power. On high power it gets some distortion like the amc is punching holes in the audio. It only seems to do it during when you first talk like the amc is not working right on the high power side. any ideas? I am working on it here but i figured i would see if anyone else has had this problem with this radio.

thanks

Mikey
User avatar
speedracer6g
Light User
Light User
Posts: 165
Joined: Saturday 23rd Feb 2008, 13:35
First Name: Michael
Location: East Freedom, PA
Contact:

Re: Cobra 150 gtl distortion on high power.

Post by speedracer6g »

Found a service bulliten from cobra. had to install a cap from ground to c607.

http://www.cbtricks.com/radios/cobra/15 ... _10043.pdf

this seems to have fixed the problem. :D
hotshot
Dead Key
Dead Key
Posts: 37
Joined: Tuesday 10th Apr 2007, 7:44
Location: ireland

Re: Cobra 150 gtl distortion on high power.

Post by hotshot »

very nice fix cheers mate was having the same problem all fixed now tnx again 29 bst 01
you will always miss the shot you don't take.
Post Reply