No Rec. or Tx on dx 2527

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
falcon505
Dead Key
Dead Key
Posts: 11
Joined: Wednesday 4th Jun 2008, 14:01
Location: lima oh

No Rec. or Tx on dx 2527

Post by falcon505 »

Radio Make and Model: Galaxy DX 2527
PCB Number: ept295013z
PLL Number: cx 79258
Test gear available: watt meter ,volt meter.signal gen, freq conter
Symptoms: no rec. or TX

What is working: cpu seems to be fine i do not know

What has been tried: Chaned both 10 .240 crystats and vc1 trimmer it now has both rec. and tx but way off freq. vfo set at 27.405 tx and rec. at 30.0700 do you think it is the cpu hope not
Did it suddenly happen ?:yes
Anything else that may be of help?: all other thinks on the cpu seem to work fine may be a voltage problem. :banghead:
falcon505
Dead Key
Dead Key
Posts: 11
Joined: Wednesday 4th Jun 2008, 14:01
Location: lima oh

Re: No Rec. or Tx on dx 2527

Post by falcon505 »

got it working now it has to warm up befor it is on frek after that it works great
Post Reply