connex 3300 hp loss of some frequencies

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
knockahoma1
Newbie
Newbie
Posts: 1
Joined: Monday 16th Jan 2006, 9:34
Location: Georgia

connex 3300 hp loss of some frequencies

Post by knockahoma1 »

Radio Make and Model: Connex 3300 hp
PCB Number:
PLL Number: 145106p
Test gear available: frequency counter and test meters
Symptoms: off frequency on some channels

What is working: The radio is working normally on channels 1 through 25, but 26 thorugh 40 takes you into the 28 mhz range.

What has been tried: changes out the pll

Did it suddenly happen ?: no
Anything else that may be of help?: On the band just below regular 40, all channel frequencies are off.
zodiac
Technical Helper
Technical Helper
Posts: 319
Joined: Sunday 7th Nov 2004, 13:58
Location: UK

Re: connex 3300 hp loss of some frequencies

Post by zodiac »

Try adjusting the VCO slightly to see if you get any more channels than you've got, somebody might have been playing with it, like they do.
How far is it.
Twice it's length from halfway.
Post Reply