Off Ferq 2950

For discussions on CB Radio Repair and Troubleshooting, do not post modification requests here, use the Modifications forum !
Post Reply
falcon505
Dead Key
Dead Key
Posts: 11
Joined: Wednesday 4th Jun 2008, 14:01
Location: lima oh

Off Ferq 2950

Post by falcon505 »

Radio Make and Model: Rci 2950
PCB Number ept295013z
PLL Number cx79258
Test gear available: Ferq counter, watt meter,volt meter,
Symptoms: Way off Freq but it does have Tx and Rx vco set at 28.000 and tx and rx at 30.226
What is working: All but that

What has been tried: Tried Pll alignment ,connected ferq to L61 set at 10.240,connect ferq to L65 it is at 19.526 tried seting vr 2 will not bring it down,checked voltage at pin 3 ic7 votls at 3.47 L21 will not bring it down, checked L65 in tx freq at 19.526. help.

Did it suddenly happen ?: yes
Anything else that may be of help?:
Post Reply