Page 1 of 1

FeedBack Problems

Posted: Monday 12th Aug 2013, 13:13
by Rooster9507
I have just installed a cobra 29ltd classic, I have it hooked straight to the battery and I am using a 102" stainless steel whip. The radio works great but the problem is I am getting real bad feedback from my car through the CB Speaker :banghead: . I have the noise blocker switch but when I use it I lose some of my range. Is there anything I can do to prevent this from happening? I would appreciate any help at all thank you.

Re: FeedBack Problems

Posted: Tuesday 13th Aug 2013, 8:38
by Neo1130
I would start by checking power connection. Make sure your ground has 100% good contact. Remove paint/dirt/rust and go bare metal.

Re: FeedBack Problems

Posted: Tuesday 13th Aug 2013, 8:40
by Neo1130
Also when running wire don't go parallel with other wires. Cross at 90 degrees when possible...

Re: FeedBack Problems

Posted: Saturday 12th Oct 2013, 10:22
by hamradiotech
Is the feedback your referring to be AC alternator whine? Can you add additional information to the feedback issue. Thanks