Need Galaxy dx 949 dual mosfet upgrade not ekl version.

Discussions on CB Radio Modifications
Post Reply
User avatar
speedracer6g
Light User
Light User
Posts: 165
Joined: Saturday 23rd Feb 2008, 13:35
First Name: Michael
Location: East Freedom, PA
Contact:

Need Galaxy dx 949 dual mosfet upgrade not ekl version.

Post by speedracer6g »

I am trying to find the dual mosfet upgrade for the dx 949. I dont care much for the ekl version i never have any luck with them. Anybody have info on the new mosfet versions of this radio. any schematics would be greatly helpful.

MIKE
User avatar
Exit_Thirteen
Frequent Keyer
Frequent Keyer
Posts: 74
Joined: Saturday 12th Apr 2008, 13:10
Location: Iowa, USA
Contact:

Post by Exit_Thirteen »

Here's a link to an IRF520 dual final conversion kit for sale.

http://cgi.ebay.com/Dual-Final-Upgrade- ... dZViewItem

Yes, I know it's off fleabay, but that's the only place I could find a kit. I did try one of these kits on my Texas Ranger TR-696, with little success, changed it back over to single final. Perhaps you might have better luck than I did.

Regards,
Rick (Triple 7)
"You need to adjust that sideband. You're sounding a little daffy." -John "the 395" (Cobra Kid)
User avatar
speedracer6g
Light User
Light User
Posts: 165
Joined: Saturday 23rd Feb 2008, 13:35
First Name: Michael
Location: East Freedom, PA
Contact:

Post by speedracer6g »

thanks anyway i got the skinny from the galaxy tech at wwdx forum heres the schematics he sent me. i am just going to use this to make up my own mod. thanks.

http://www.cbtricks.com/radios/galax.../dx959_sch.pdf

http://www.cbtricks.com/radios/galax...mosfet_sch.pdf

:wink:
User avatar
speedracer6g
Light User
Light User
Posts: 165
Joined: Saturday 23rd Feb 2008, 13:35
First Name: Michael
Location: East Freedom, PA
Contact:

Post by speedracer6g »

Hey I also found that the dx 98vhp mainboard has dual mosfets on it. so you could use this to do the mod also. just folow the schematics from that.

MIKE
Post Reply