Magnum S3

Discussions on CB Radio Modifications
Post Reply
User avatar
mag69
Dead Key
Dead Key
Posts: 14
Joined: Monday 24th Oct 2005, 14:00
Location: Port Huron, Mi

Magnum S3

Post by mag69 »

I got a Magnum S3 and it has the 2030 finals and driver in it, would the IRF520 increase the power and are they a drop right in final?
and are they and mods to increase power on these radios?
And what is the purpose of the 10k switch?
Cherokee CBS 2100
Magnum S3
IMax 2000
Uniden 78XL
Cobra 29 LTD ST
Wilson 5000 magnet mounts
Uniden 510XL with a little Wil
Monitoring 27.005 in the Great Lakes State
Flash
Dead Key
Dead Key
Posts: 10
Joined: Wednesday 27th Aug 2008, 11:59
Location: Tulare ,Ca.

S3?

Post by Flash »

Hi, not sure about the mosfets but the 10khz switch moves you up one channel or 10khz. It is used to give you the RC channels that are between channels 3-4, 7-8, 11-12, 15-16, 19-20.

Good luck with the mosfets!

Flash
User avatar
mag69
Dead Key
Dead Key
Posts: 14
Joined: Monday 24th Oct 2005, 14:00
Location: Port Huron, Mi

Post by mag69 »

Thanks Flash :D
Cherokee CBS 2100
Magnum S3
IMax 2000
Uniden 78XL
Cobra 29 LTD ST
Wilson 5000 magnet mounts
Uniden 510XL with a little Wil
Monitoring 27.005 in the Great Lakes State
Post Reply