Cobra 19 Ultra iii
-
- Newbie
- Posts: 1
- Joined: Thursday 10th Nov 2011, 12:48
- First Name: Angel
- Location: Atlanta georgia
- Contact:
Cobra 19 Ultra iii
Hi, I just purchased a cobra 19 ultra iii, and was wondering if anyone has the scoop on mods for my new toy. I am interested in boosting modulation and peak envelope power.I was told that the cobra 19 dx iv is the same as the ultra iii..so... I cracked it open, and wala.. there on the board, it says, " 19 dx ..I would greatly appreciate it , if anyone can help me. thanks. DOC.
-
- Dead Key
- Posts: 20
- Joined: Wednesday 31st Oct 2007, 12:13
- Location: usa
Re: Cobra 19 Ultra iii
Not alot to be done with these.
LT1 wil adjust power NO MODULATION
RVM1 is modulation pot
LT1 wil adjust power NO MODULATION
RVM1 is modulation pot
Re: Cobra 19 Ultra iii
I'd like to have such mods myself..
-
- Newbie
- Posts: 1
- Joined: Saturday 17th Nov 2012, 16:27
- First Name: ashar
- Location: faisalabad
Re: Cobra 19 Ultra iii
I've had the best luck with this radio. I had to buy a radioshack SWR meter and a 102" whip antenna to get the radio working perfectly(1.5 SWR). I have the HG A1500 antenna and it isn't really the best for this radio (even though Cobra recommends it). Now all I have to do is find a non destructive way to mount the 102" antenna to my car. LOL
I have to wonder though, with CB technology being as old as it is, why has nobody made an easy to understand (non laborious reading) tutorial about this technology. There are lots of resources on the web, I know, but I feel like it's overloading sometimes and it loses me in its directive. I'm a hands on AV learner and I wish somebody would make a simple step-by-step presentation that serves as a back bone for the more complex issues without putting me to sleep. LOL
Well, this is my first post, I hope to hear from you soon.
I have to wonder though, with CB technology being as old as it is, why has nobody made an easy to understand (non laborious reading) tutorial about this technology. There are lots of resources on the web, I know, but I feel like it's overloading sometimes and it loses me in its directive. I'm a hands on AV learner and I wish somebody would make a simple step-by-step presentation that serves as a back bone for the more complex issues without putting me to sleep. LOL
Well, this is my first post, I hope to hear from you soon.
Re: Cobra 19 Ultra iii
Edward,
I know what you mean about falling asleep.
Lou Franklin does his best to explain in simple terms most of what you need to know for the beginner in his book, THE SCREWDRIVER'S EXPERT'S GUIDE.
If you need a book to get started with that won't put you to sleep, there was a book from Radio Shack by Forrest Mims, III.
called, Getting started in Electronics and it's funny as well as very informative and easy to understand.
I know what you mean about falling asleep.
Lou Franklin does his best to explain in simple terms most of what you need to know for the beginner in his book, THE SCREWDRIVER'S EXPERT'S GUIDE.
If you need a book to get started with that won't put you to sleep, there was a book from Radio Shack by Forrest Mims, III.
called, Getting started in Electronics and it's funny as well as very informative and easy to understand.
How far is it.
Twice it's length from halfway.
Twice it's length from halfway.