lincoln HR2510 MRF455 pcb

Discussions on CB Radio Modifications
Post Reply
KC7NOA
Dead Key
Dead Key
Posts: 36
Joined: Wednesday 9th Nov 2011, 15:25
First Name: Mike
Location: Spokane wa

lincoln HR2510 MRF455 pcb

Post by KC7NOA »

Well I just got my 2510 up and working -.. poof I smoked a Mrf497 - god im a fool ... I know darn well my match is bad around 26.965!!!

Where to get the pcb for useing an mrf455??
User avatar
The Defpom
Site Admin
Site Admin
Posts: 436
Joined: Friday 20th Aug 2004, 18:06
Location: New Zealand
Contact:

Re: lincoln HR2510 MRF455 pcb

Post by The Defpom »

I have just used some very short hookup wires to the main PCB after mounting the 455 on the rear panel, worked fine, I think I did rogerbirds mod from memory.
KC7NOA
Dead Key
Dead Key
Posts: 36
Joined: Wednesday 9th Nov 2011, 15:25
First Name: Mike
Location: Spokane wa

Re: lincoln HR2510 MRF455 pcb

Post by KC7NOA »

Ok ... ill go that route .... it seemed that the thermal bias diode is.in the way big time ...
User avatar
The Defpom
Site Admin
Site Admin
Posts: 436
Joined: Friday 20th Aug 2004, 18:06
Location: New Zealand
Contact:

Re: lincoln HR2510 MRF455 pcb

Post by The Defpom »

Mount the new MRF455 / SRF3775 on the rear panel on the bottom of the radio instead of the top, much more room there :-)
Attachments
srf3775hr2510.jpg
srf3775hr2510.jpg (75.93 KiB) Viewed 11373 times
Post Reply