Variable talk back install in older 148-GTL side-mic

Discussions on CB Radio Modifications
Post Reply
kc5mbs
Newbie
Newbie
Posts: 1
Joined: Wednesday 26th Dec 2012, 15:06
First Name: Rick
Location: Arkansas

Variable talk back install in older 148-GTL side-mic

Post by kc5mbs » Wednesday 26th Dec 2012, 15:25

I have an older Taiwan-made Cobra 148-GTL. I just got my UTB-1 variable talk back kit. The instructions apparently only apply to newer radios. They require cutting a board trace at the external speaker jack and soldering a wire to each side of the cut. The problem is my old radio has no such trace. I am hoping to find someone who has performed this install on a 148 or Grant-XL. Any input would be greatly appreciated.

Post Reply

Return to “CB Radio Modifications”