TRC70

A section for Marine radios, VHF and UHF radios, for all types of discussions dealing with these types.
Post Reply
Jikaleza
Newbie
Newbie
Posts: 1
Joined: Saturday 16th Aug 2008, 18:46
Location: Auckland

TRC70

Post by Jikaleza »

I have a Kenwood TRC70 and know that via S301, you can set the TX power to Hi, Med or Lo.

Does anyone know of a code via the keypad to do this?

I did try and rig a switch via ribbon cable to S301 but it creates noise on the RX side - I think the wire is picking up something.

Cheers,

Steve.
Post Reply