Cobra 2000GTL Alignment instructions needed

For discussions on CB Radio Alignment and Tuning
Post Reply
User avatar
Irate Pirate
Newbie
Newbie
Posts: 6
Joined: Monday 17th Nov 2008, 9:22
Location: Lehigh Acres
Contact:

Cobra 2000GTL Alignment instructions needed

Post by Irate Pirate » Thursday 22nd Jan 2009, 11:00

I cannot locate them anywhere. The board is a "PC-497AP"... No other radio has this board (that i can find).
I got it in pretty good on AM RX using my trusty sig generator, but I don't know where to go from here. SAMS is #251, but they are scarce, and overpriced... I guess that's due to supply/demand..
Any help would be appreciated.
Apha Hotel Three and I'm backout!

YosemitySam
Dead Key
Dead Key
Posts: 47
Joined: Saturday 24th Feb 2007, 17:41
Location: Stixs

Re: Cobra 2000GTL Alignment instructions needed

Post by YosemitySam » Saturday 5th Dec 2009, 11:19


User avatar
Irate Pirate
Newbie
Newbie
Posts: 6
Joined: Monday 17th Nov 2008, 9:22
Location: Lehigh Acres
Contact:

Re: Cobra 2000GTL Alignment instructions needed

Post by Irate Pirate » Sunday 6th Dec 2009, 2:26

Yes, Sam, I found the info some time back, but your reply will surely help everyone else does a search for "cobra200 alignment".
Many Thanks.
Apha Hotel Three and I'm backout!

YosemitySam
Dead Key
Dead Key
Posts: 47
Joined: Saturday 24th Feb 2007, 17:41
Location: Stixs

Re: Cobra 2000GTL Alignment instructions needed

Post by YosemitySam » Sunday 6th Dec 2009, 12:42

No problem, I acutually emailed Cobra with the board number. I find that if you email places like Cobra or Galaxy for Schematics or other Aligment related isues they can sometimes help but not always.

Post Reply

Return to “CB Radio Alignments”