Page 1 of 1

Cobra 2000GTL Alignment instructions needed

Posted: Thursday 22nd Jan 2009, 11:00
by Irate Pirate
I cannot locate them anywhere. The board is a "PC-497AP"... No other radio has this board (that i can find).
I got it in pretty good on AM RX using my trusty sig generator, but I don't know where to go from here. SAMS is #251, but they are scarce, and overpriced... I guess that's due to supply/demand..
Any help would be appreciated.

Re: Cobra 2000GTL Alignment instructions needed

Posted: Saturday 5th Dec 2009, 11:19
by YosemitySam

Re: Cobra 2000GTL Alignment instructions needed

Posted: Sunday 6th Dec 2009, 2:26
by Irate Pirate
Yes, Sam, I found the info some time back, but your reply will surely help everyone else does a search for "cobra200 alignment".
Many Thanks.

Re: Cobra 2000GTL Alignment instructions needed

Posted: Sunday 6th Dec 2009, 12:42
by YosemitySam
No problem, I acutually emailed Cobra with the board number. I find that if you email places like Cobra or Galaxy for Schematics or other Aligment related isues they can sometimes help but not always.