EPT3600-14b driver bias settings

For discussions on CB Radio Alignment and Tuning
Post Reply
User avatar
13EL121
Dead Key
Dead Key
Posts: 27
Joined: Sunday 27th Apr 2008, 9:56
First Name: Ralf
Location: Germany

EPT3600-14b driver bias settings

Post by 13EL121 »

Hi guys! What is the correct bias setting for the driver in a EPT3600-14B board. I have a Midland Alan 8001 for repair, same board as SS-3900. The radio works fine but the driver bias was set to ~80mA. I found different service manuals. Some say the driver bias is 10mA, some say 50-75mA. In both settings the SSB sound is good. Now i'm a little bit confused what is correct. Can somebody help? Many thanks!
73s from germany.
Post Reply