superstar 3900

For discussions on CB Radio Alignment and Tuning
Post Reply
tonyspark
Newbie
Newbie
Posts: 9
Joined: Tuesday 2nd Jun 2009, 11:19
First Name: tony
Location: yorkshire
Contact:

superstar 3900

Post by tonyspark »

when i have ssb on the radio,s the fine/course has a notch where it would normal sit in.(to be on tri 555) with mine you have to just turn it anticlock wise just out of the notch to be on frequency, is there a simple way of adjusting it very little.
User avatar
Animal
Light User
Light User
Posts: 125
Joined: Thursday 18th Jan 2007, 8:13
Location: Location : Location

Re: superstar 3900

Post by Animal »

In a word 'No'

This phenomenon normally occurs with a transceiver which has had a PLL synthesizer alignment without letting the radio warm-up first.

As per the alignment procedure, put the clarifier control(s) in the center detent, then re-adjust offsets.

You'll need a stand alone frequency counter with 25mV sensitivity, an oscilloscope, ceramic trimmer tools, & a service manual.

Failing that, have it done for you by someone with the appropriate equipment & experience.


PS Where in Yorkshire are you? West, East, etc???
You're 5 & 9 - what's your QRZ again???
tonyspark
Newbie
Newbie
Posts: 9
Joined: Tuesday 2nd Jun 2009, 11:19
First Name: tony
Location: yorkshire
Contact:

Re: superstar 3900

Post by tonyspark »

west yorkshire, , between wakefield,pontefract and doncaster.
Post Reply