SWR meter

For discussions on CB Radio Alignment and Tuning
Post Reply
Tipsy
Newbie
Newbie
Posts: 8
Joined: Thursday 21st Jan 2010, 11:31
First Name: Mike
Location: Christchurch, South Coast UK

SWR meter

Post by Tipsy »

I hope this is the right category to post in, it is related to antenna tuning...

The SWR meter I've aquired has a tiny input labelled FS ANT. A quick google reveals some SWR meters come with a short stainless steel wire/aerial that's attached to the SWR meter http://www.sunequipco.com/electronic%20 ... PS-100.HTM

I'm curious to know what the small aerial's purpose is and if I need to aquire one to operate my meter correctly or is it a useful but non-essential add-on?
User avatar
The Defpom
Site Admin
Site Admin
Posts: 436
Joined: Friday 20th Aug 2004, 18:06
Location: New Zealand
Contact:

Re: SWR meter

Post by The Defpom »

It is not really needed, FS stands for Field Strength, it is used to check the radiation pattern of the antenna, I have never used one, and am not really sure it is of much use anyway, personally I think it was just a bit of a gimmick.
Post Reply