GalaxyII Aligmnent procedure needed (EPT360010A)

For discussions on CB Radio Alignment and Tuning
Post Reply
User avatar
12footer
Newbie
Newbie
Posts: 3
Joined: Tuesday 12th Oct 2010, 1:04
First Name: Sean
Location: Lehigh Acres, Florida, USA
Contact:

GalaxyII Aligmnent procedure needed (EPT360010A)

Post by 12footer »

I've looked high n low for this one. EPT360010A Main board. Original Saturn bases and GalaxyII mobiles use this board.
I can't even get it "close" without the alignment procedure. One tank coil effects the other modes, then they effect that one!! Going in circles here lol.

Any direction you can give me would be greatly appreciated.
Pepe Le Pew
Dead Key
Dead Key
Posts: 20
Joined: Tuesday 14th Feb 2012, 12:14
First Name: Michael
Location: Roanoke

Re: GalaxyII Aligmnent procedure needed (EPT360010A)

Post by Pepe Le Pew »

I have a hard copy of the Alignment procedures for this radio, but no way to scan it. at least not yet. Please let me know if you are still in need of this info. Thanks...
allen05
Newbie
Newbie
Posts: 1
Joined: Friday 1st Feb 2013, 18:58
First Name: allen
Location: fsddd

Re: GalaxyII Aligmnent procedure needed (EPT360010A)

Post by allen05 »

I purchased a registration number for the simulator and haven't received it yet its been a few days.
Amelia40
Newbie
Newbie
Posts: 1
Joined: Monday 8th Jul 2013, 23:44
First Name: Amelia
Location: New York USA

Re: GalaxyII Aligmnent procedure needed (EPT360010A)

Post by Amelia40 »

Technical editing may include the improvement of grammatical mistakes, misspellings, mistyping, and incorrect punctuation, inconsistencies in usage, poorly structured sentence, and wrong systematic terms
mb91w126
Newbie
Newbie
Posts: 1
Joined: Thursday 19th Sep 2013, 7:24
First Name: James
Location: 07922

Re: GalaxyII Aligmnent procedure needed (EPT360010A)

Post by mb91w126 »

Pepe Le Pew wrote:I have a hard copy of the Alignment procedures for this radio, but no way to scan it. at least not yet. Please let me know if you are still in need of this info. Thanks...
If you have scanned it by now, I would appreciate a copy.
Thanks
Jim
User avatar
12footer
Newbie
Newbie
Posts: 3
Joined: Tuesday 12th Oct 2010, 1:04
First Name: Sean
Location: Lehigh Acres, Florida, USA
Contact:

Re: GalaxyII Aligmnent procedure needed (EPT360010A)

Post by 12footer »

My apologies to the forum! It has been over a year since I've checked-in. Life has been hellacious and hectic since this post.
There is now some alignment data available here on defpom and cbtricks' sites for this chassis, and
I got that one going long ago. But still wonder if Ranger/RCI will ever distribute a voltage chart on any of their boards.
It certainly would make life easier for a lot of techs.
Post Reply