The Old Browning Ping
-
- Dead Key
- Posts: 20
- Joined: Tuesday 14th Feb 2012, 12:14
- First Name: Michael
- Location: Roanoke
The Old Browning Ping
I built this project that was submitted by Stan the Man. It works just fine, but I need help figuring out where to hook the green wire. Says on the instructions the green goes to ground when the radio is keyed. Where in the radio should I hook this, or do I need to manually ground it after I have keyed the radio? The radio that I'm using for testing purposes is an old Cobra 77x. Thanks for the help.
- The Defpom
- Site Admin
- Posts: 436
- Joined: Friday 20th Aug 2004, 18:06
- Location: New Zealand
- Contact:
Re: The Old Browning Ping
Sounds like it needs to go to the tx from the mic, I would have to check it though
-
- Dead Key
- Posts: 20
- Joined: Tuesday 14th Feb 2012, 12:14
- First Name: Michael
- Location: Roanoke
Re: The Old Browning Ping
Same thing I originally thought. but it does not make any sound when connected to the transmit. I was thinking somewhere along the switching transistors, just not sure where that is in this old radio.