Need PLL IC Chip

This is an area for you to post requests for any radio parts, equipment or test gear that you are looking for.
Post Reply
Phyzz
Newbie
Newbie
Posts: 4
Joined: Wednesday 1st Apr 2009, 14:53
First Name: Philip
Location: Pittsburgh, PA

Need PLL IC Chip

Post by Phyzz »

I'm looking for a PLL IC for a Cobra 29 LTD. The schematic says it's a UP2816P, the chip number is a D2816c Nippon, and a sight on the internet says uPD2816. That number (uPD2816) is grouped with a uPD2814, HD42853, ans a KM5624. I don't know if there interchangeable or not. Any leads? Phyzz
Radiofad
Newbie
Newbie
Posts: 5
Joined: Saturday 4th Apr 2009, 17:07
First Name: Kel
Location: Australia

Re: Need PLL IC Chip

Post by Radiofad »

Phyzz
I do have some stock left over of the 2816 pll . If I can help let me know .
Radiofad
Phyzz
Newbie
Newbie
Posts: 4
Joined: Wednesday 1st Apr 2009, 14:53
First Name: Philip
Location: Pittsburgh, PA

Re: Need PLL IC Chip

Post by Phyzz »

While poking around on eBay, I found a used one. I hope it's good. He said the cobra 146GTL it came out of was still receiving. I'll keep in touch.

Thanks, Phyzz
Radiofad
Newbie
Newbie
Posts: 5
Joined: Saturday 4th Apr 2009, 17:07
First Name: Kel
Location: Australia

Re: Need PLL IC Chip

Post by Radiofad »

OK
Phyzz
Newbie
Newbie
Posts: 4
Joined: Wednesday 1st Apr 2009, 14:53
First Name: Philip
Location: Pittsburgh, PA

Re: Need PLL IC Chip

Post by Phyzz »

Boy do I feel dumb. The problem wasn't the PLL. I never took it out of the well packed envelope you sent. Here it was an open L24 coil. I was going by semiconductor voltages and the PLL chip was reading strange. well live and learn. To top things off, a guy 10 mile up the road had a whole 29 circuit board that he couldn't get receive to work properly, so he sold me the whole thing for $10 and now I have spare everything except for L24. That radio's out the door. Thanks for your fast service. Phyzz
n3wbv
Newbie
Newbie
Posts: 1
Joined: Tuesday 4th Mar 2008, 15:17
Location: Phila. ,PA

Re: Need PLL IC Chip

Post by n3wbv »

I have L24 if you still need it!.From n3wbv.
Post Reply