Page 1 of 1

Need PLL IC Chip

Posted: Wednesday 1st Apr 2009, 23:39
by Phyzz
I'm looking for a PLL IC for a Cobra 29 LTD. The schematic says it's a UP2816P, the chip number is a D2816c Nippon, and a sight on the internet says uPD2816. That number (uPD2816) is grouped with a uPD2814, HD42853, ans a KM5624. I don't know if there interchangeable or not. Any leads? Phyzz

Re: Need PLL IC Chip

Posted: Saturday 4th Apr 2009, 17:29
by Radiofad
Phyzz
I do have some stock left over of the 2816 pll . If I can help let me know .
Radiofad

Re: Need PLL IC Chip

Posted: Saturday 4th Apr 2009, 23:03
by Phyzz
While poking around on eBay, I found a used one. I hope it's good. He said the cobra 146GTL it came out of was still receiving. I'll keep in touch.

Thanks, Phyzz

Re: Need PLL IC Chip

Posted: Sunday 5th Apr 2009, 11:05
by Radiofad
OK

Re: Need PLL IC Chip

Posted: Thursday 16th Apr 2009, 18:06
by Phyzz
Boy do I feel dumb. The problem wasn't the PLL. I never took it out of the well packed envelope you sent. Here it was an open L24 coil. I was going by semiconductor voltages and the PLL chip was reading strange. well live and learn. To top things off, a guy 10 mile up the road had a whole 29 circuit board that he couldn't get receive to work properly, so he sold me the whole thing for $10 and now I have spare everything except for L24. That radio's out the door. Thanks for your fast service. Phyzz

Re: Need PLL IC Chip

Posted: Monday 9th Apr 2012, 10:49
by n3wbv
I have L24 if you still need it!.From n3wbv.