Sea Hawk 2710

This is an area for you to post requests for any radio parts, equipment or test gear that you are looking for.
Post Reply
6ZYN
Newbie
Newbie
Posts: 1
Joined: Sunday 20th Jun 2010, 4:29
First Name: Bruce
Location: Durban, South Africa

Sea Hawk 2710

Post by 6ZYN »

I have received a Synchro Landmaster, 6 channel 29MHz AM, for repair and I am looking for info on this unit. I cannot trace any on the internet. It is marked Sychro Landmaster, I have also seen Synchro Seamaster, on the front panel and Sea Hawk 2170 on the rear. It also has Australian type approval and the importer is given as President Electronics, Sydney. A number of Synchro models were imported to South Africa but I cannot trace who by.

The main PCB is marked Sea Hawk EPT271010z and the switch PCB EPT271040z. The third board restricts the number of channels and was clearly locally produced. The EPT prefix suggests Ranger or Galaxy but I have been unable to find the 271010 in any info I have access to.

Anyone in Australia/NZ have a schematic or any other info on these units?

6ZYN
Hennie Roets
Newbie
Newbie
Posts: 2
Joined: Sunday 17th Jan 2010, 22:51
First Name: Hennie
Location: South Africa

Re: Sea Hawk 2710

Post by Hennie Roets »

Hi.
I do repairs on 29MHz radios an info on them are hard to come by.
I have the same radio on my workbench which now is in good shape. Perhaps I can help with some voltage readings.

Regards
Hennie
Post Reply