Cobra 2000GTL Alignment instructions needed

For discussions on CB Radio Alignment and Tuning
Post Reply
User avatar
Irate Pirate
Newbie
Newbie
Posts: 6
Joined: Monday 17th Nov 2008, 9:22
Location: Lehigh Acres
Contact:

Cobra 2000GTL Alignment instructions needed

Post by Irate Pirate »

I cannot locate them anywhere. The board is a "PC-497AP"... No other radio has this board (that i can find).
I got it in pretty good on AM RX using my trusty sig generator, but I don't know where to go from here. SAMS is #251, but they are scarce, and overpriced... I guess that's due to supply/demand..
Any help would be appreciated.
Apha Hotel Three and I'm backout!
YosemitySam
Dead Key
Dead Key
Posts: 47
Joined: Saturday 24th Feb 2007, 17:41
Location: Stixs

Re: Cobra 2000GTL Alignment instructions needed

Post by YosemitySam »

User avatar
Irate Pirate
Newbie
Newbie
Posts: 6
Joined: Monday 17th Nov 2008, 9:22
Location: Lehigh Acres
Contact:

Re: Cobra 2000GTL Alignment instructions needed

Post by Irate Pirate »

Yes, Sam, I found the info some time back, but your reply will surely help everyone else does a search for "cobra200 alignment".
Many Thanks.
Apha Hotel Three and I'm backout!
YosemitySam
Dead Key
Dead Key
Posts: 47
Joined: Saturday 24th Feb 2007, 17:41
Location: Stixs

Re: Cobra 2000GTL Alignment instructions needed

Post by YosemitySam »

No problem, I acutually emailed Cobra with the board number. I find that if you email places like Cobra or Galaxy for Schematics or other Aligment related isues they can sometimes help but not always.
Post Reply