TC9106 PLL Replacement for cobra 25 ltd

Discussions on CB Radio Modifications
Post Reply
User avatar
speedracer6g
Light User
Light User
Posts: 165
Joined: Saturday 23rd Feb 2008, 13:35
First Name: Michael
Location: East Freedom, PA
Contact:

TC9106 PLL Replacement for cobra 25 ltd

Post by speedracer6g »

Just wondering if there is a pll chip that can be installed in the cobra 25 ltd that will allow you to do the 10kc jump for the alpha channels? If not I think there may be anoter way. Anyone have any ideas?

MIKE :?:
User avatar
The Defpom
Site Admin
Site Admin
Posts: 436
Joined: Friday 20th Aug 2004, 18:06
Location: New Zealand
Contact:

Post by The Defpom »

I replace the PLL with an EPROM/PLL combo board, which I have programmed to give extra bands...
User avatar
speedracer6g
Light User
Light User
Posts: 165
Joined: Saturday 23rd Feb 2008, 13:35
First Name: Michael
Location: East Freedom, PA
Contact:

Post by speedracer6g »

did you make your own board or was it a kit? If it was a kit who makes it?

MIKE
User avatar
The Defpom
Site Admin
Site Admin
Posts: 436
Joined: Friday 20th Aug 2004, 18:06
Location: New Zealand
Contact:

Post by The Defpom »

I make my own conversion boards.[/i]
lodownlv
Newbie
Newbie
Posts: 1
Joined: Saturday 28th May 2011, 4:43
First Name: jay
Location: nevada

Re: TC9106 PLL Replacement for cobra 25 ltd

Post by lodownlv »

how can i build a pll eprom replacement for my radio? i cannot find any info can you direct me to the right place?
thanks
zodiac
Technical Helper
Technical Helper
Posts: 319
Joined: Sunday 7th Nov 2004, 13:58
Location: UK

Re: TC9106 PLL Replacement for cobra 25 ltd

Post by zodiac »

Your in the right place, Scott's the man to see for the conversion.
How far is it.
Twice it's length from halfway.
User avatar
Simon98Arland
Newbie
Newbie
Posts: 1
Joined: Monday 27th Jun 2011, 20:02
First Name: Simon
Location: 5160 7th St Ne, Washington, DC 20011

Re: TC9106 PLL Replacement for cobra 25 ltd

Post by Simon98Arland »

Is it necessary to register for specialist technical information, like circuit diagrams, service manuals,etc?
Post Reply