I've looked high n low for this one. EPT360010A Main board. Original Saturn bases and GalaxyII mobiles use this board.
I can't even get it "close" without the alignment procedure. One tank coil effects the other modes, then they effect that one!! Going in circles here lol.
Any direction you can give me would be greatly appreciated.
GalaxyII Aligmnent procedure needed (EPT360010A)
-
- Dead Key
- Posts: 20
- Joined: Tuesday 14th Feb 2012, 12:14
- First Name: Michael
- Location: Roanoke
Re: GalaxyII Aligmnent procedure needed (EPT360010A)
I have a hard copy of the Alignment procedures for this radio, but no way to scan it. at least not yet. Please let me know if you are still in need of this info. Thanks...
Re: GalaxyII Aligmnent procedure needed (EPT360010A)
I purchased a registration number for the simulator and haven't received it yet its been a few days.
-
- Newbie
- Posts: 1
- Joined: Monday 8th Jul 2013, 23:44
- First Name: Amelia
- Location: New York USA
Re: GalaxyII Aligmnent procedure needed (EPT360010A)
Technical editing may include the improvement of grammatical mistakes, misspellings, mistyping, and incorrect punctuation, inconsistencies in usage, poorly structured sentence, and wrong systematic terms
Re: GalaxyII Aligmnent procedure needed (EPT360010A)
If you have scanned it by now, I would appreciate a copy.Pepe Le Pew wrote:I have a hard copy of the Alignment procedures for this radio, but no way to scan it. at least not yet. Please let me know if you are still in need of this info. Thanks...
Thanks
Jim
- 12footer
- Newbie
- Posts: 3
- Joined: Tuesday 12th Oct 2010, 1:04
- First Name: Sean
- Location: Lehigh Acres, Florida, USA
- Contact:
Re: GalaxyII Aligmnent procedure needed (EPT360010A)
My apologies to the forum! It has been over a year since I've checked-in. Life has been hellacious and hectic since this post.
There is now some alignment data available here on defpom and cbtricks' sites for this chassis, and
I got that one going long ago. But still wonder if Ranger/RCI will ever distribute a voltage chart on any of their boards.
It certainly would make life easier for a lot of techs.
There is now some alignment data available here on defpom and cbtricks' sites for this chassis, and
I got that one going long ago. But still wonder if Ranger/RCI will ever distribute a voltage chart on any of their boards.
It certainly would make life easier for a lot of techs.