cobra 29ltd classic no receive
- perrym1962
- Frequent Keyer
- Posts: 52
- Joined: Monday 4th Sep 2006, 17:00
- Location: East View, Ky.
cobra 29ltd classic no receive
I have a Cobra 29LTD classic front mic mfg date 12/04. Transmits perfectly. Receive is dead. No meter movement, nothing. Have replaced tr-23, d-1, d-2, tr-12, tr-13, and IC-4 by the advice of other sources. Thank you, Perry in Ky.. Radio was used for close range application so I was told.
- perrym1962
- Frequent Keyer
- Posts: 52
- Joined: Monday 4th Sep 2006, 17:00
- Location: East View, Ky.
Re: cobra 29ltd classic no receive
If the radio has been connected to the PSU or Battery the wrong way, there is a good possible that FET 1 and 2 are O/S.
Try lifting to Collector of TR13 and TR11 and see if the audio comes back, also check the voltages around TR8, 9 and 10, there radios do have some bad Electrolytic capacitors. Let us know how you get on.
Rick.
Try lifting to Collector of TR13 and TR11 and see if the audio comes back, also check the voltages around TR8, 9 and 10, there radios do have some bad Electrolytic capacitors. Let us know how you get on.
Rick.
- perrym1962
- Frequent Keyer
- Posts: 52
- Joined: Monday 4th Sep 2006, 17:00
- Location: East View, Ky.
-
- Newbie
- Posts: 6
- Joined: Monday 16th Jan 2006, 5:05
- Location: 40 Summit Ridge Dr.SE Cartersville, Ga
Perry I know I maybe alittle late here since you have sold the radio, but I have had a problem with the recieve on a new 29 ltd also. It turned to be R-31 is suppose to be 47k 1/6W and it was opened to 137k had very little recieve. I changed it to a 47k 1/2W and it worked fine, I think the 1/6 watt is too small.
Ken
Ken