grant lt

perrym1962 · Post by **perrym1962** » Sunday 25th Feb 2007, 5:15

I have a grant lt that I did the pll conversion on. Radio works perfectly except for the channel display. I touched a trace with the solder pen in the area between the pll and the channel selector ribbon and the display went very dim and then went out. I replaced the led but that is not the problem.

Rick · Post by **Rick** » Sunday 25th Feb 2007, 7:42

Check out http://www.radiomods.co.nz/forum/viewtopic.php?t=312 As there are 4 different models you need to let us know what you.

Rick.

perrym1962 · Post by **perrym1962** » Sunday 25th Feb 2007, 9:44

Uniden Grant LT, Phillipines, MB8719, Ser.#96004025

Rick · Post by **Rick** » Sunday 25th Feb 2007, 13:21

As you have not given us the PCB number. I can only guess what to try TR28 or TR401, check to see if the transistors are OS.

Rick.

perrym1962 · Post by **perrym1962** » Sunday 25th Feb 2007, 13:33

PB-208ad is the only # I can see..

Rick · Post by **Rick** » Monday 26th Feb 2007, 0:33

Try replacing TR28 to see if cure the fault.

Rick.

perrym1962 · Post by **perrym1962** » Monday 26th Feb 2007, 3:50

It is marked Q28 which I am sure is the same. I will find another one and try this. Thank you for your time..

perrym1962 · Post by **perrym1962** » Wednesday 28th Feb 2007, 10:15

That took care of it. Thank's Rick and I do appreciate your time..

The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

grant lt

grant lt

Re: grant lt.

Re: Grant LT no dispaly.

Re: Grant LT no dispaly.