3/8th to 5/16 thread adaptor required asap

For discussions dealing with CB Antenna Systems.
Post Reply
hamguy2
Light User
Light User
Posts: 101
Joined: Monday 20th Oct 2008, 22:16
Location: sydney australia
Contact:

3/8th to 5/16 thread adaptor required asap

Post by hamguy2 »

hi everyone, im chasing a thread adaptor the reason i want 1 or a few of these antenna adaptors as the usa antenna thread is 3/8 thread and in australia we are 5/16 thread on our bases .,the usa antenna will screw onto our thread no problems but without thye adaptors or adaptor we cannot use the 27cb usa antenna without changing our base and lead set up to a usa one .thanks david nsw australia . :)
euhara
Frequent Keyer
Frequent Keyer
Posts: 62
Joined: Tuesday 29th Jul 2008, 23:59
Location: Fort Collins, Colorado
Contact:

3/8th to 5/16 thread adaptor required asap

Post by euhara »

All you need is a helicoil to fit from 5/16 to 3/8, you should have them there. They come with a tap and a steel insert in sets. Hope this helps.

Cheers, Jim
hamguy2
Light User
Light User
Posts: 101
Joined: Monday 20th Oct 2008, 22:16
Location: sydney australia
Contact:

3/8th to 5/16 thread adaptor required asap

Post by hamguy2 »

its 3/8 to 5/16 jim only australia and nz are on that thread but we got some monkey and predator antennas in and terminators there a top antenna,regards david nsw
User avatar
TrumpyNZ
Technical Helper
Technical Helper
Posts: 30
Joined: Thursday 30th Sep 2004, 9:34
First Name: Mike
Location: Ashburton, New Zealand

Re: 3/8th to 5/16 thread adaptor required asap

Post by TrumpyNZ »

MobileOne Aerials in Sydney have more than likely got what you're after.

:D
____________________
Cheers,
Mike. :)
Post Reply