President P-300
Posted: Tuesday 25th Dec 2007, 6:56
I am looking for the scematics on this radio. Any help would be much appreciated. Thank you.
The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom
This forum is for discussions on CB radio matters (RadioMods Website), software support with S&M Software, and discussion about my own music.
http://www.radiomods.co.nz/forum/
President P-300
Page 1 of 1
Re: President P-300
Posted: Tuesday 25th Dec 2007, 7:45
What is the PCB Number?
Posted: Tuesday 25th Dec 2007, 7:49
The only #`s I can find is as follows. PB-008AAPosted: Tuesday 25th Dec 2007, 7:51
While we are at it Sir Rick, all I need is the order where the mic wires are soldered to the board. Some one removed the roger beep board, and didn`t mark the wires.
Posted: Tuesday 25th Dec 2007, 8:34
I found it PC833AF. Thanks again Rick.
Posted: Tuesday 25th Dec 2007, 9:41
That is the same PCB as used in the AX144 / AR144 radios, I have a copy of the block and circuit diagram in the members area.
Posted: Wednesday 26th Dec 2007, 3:39
This is the same as Cobra 146 GTL
James.
James.
Posted: Sunday 30th Dec 2007, 5:15
I found this on CBTricks.
http://www.cbtricks.com/radios/cobra/14 ... tl_sch.pdf
http://www.cbtricks.com/radios/cobra/14 ... tl_sch.pdf