I have alignment info for this radio that is conflicting.
After pulling the shorting PC board .....
One source (CB Tricks) says:
Connect current meter to TP7+ and TP9- adjust VR12 for 50MA.
Connect current meter to TP7+ and TP8- adjust VR10 for 100MA
The other source (Defpom's CB site tech manual download) says:
Connect current meter to TP7+ and TP9- adjust VR12 for 100MA.
Connect current meter to TP8+ and TP9- adjust VR10 for 50MA
Which is correct?