The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

I have alignment info for this radio that is conflicting.

After pulling the shorting PC board .....

One source (CB Tricks) says:

Connect current meter to TP7+ and TP9- adjust VR12 for 50MA.
Connect current meter to TP7+ and TP8- adjust VR10 for 100MA

The other source (Defpom's CB site tech manual download) says:

Connect current meter to TP7+ and TP9- adjust VR12 for 100MA.
Connect current meter to TP8+ and TP9- adjust VR10 for 50MA

Which is correct?