Radio Make and Model: cobra 148 gtl-d
PCB Number: kepc-332-e6
PLL Number: 8719
Test gear available: scope, comm analyzer, ac/dc meter , freq gen/counter ect.
Symptoms: No tx in am mode ,ssb ok in tx and receive. pa working in ssb mode but not in am mode. Rx works in am mode just no carrier or mod.
What is working:
What has been tried: replaced am regulator. tested voltages
cobra 148 gtl no tx in am rx ok.
- speedracer6g
- Light User
- Posts: 165
- Joined: Saturday 23rd Feb 2008, 13:35
- First Name: Michael
- Location: East Freedom, PA
- Contact:
- The Defpom
- Site Admin
- Posts: 436
- Joined: Friday 20th Aug 2004, 18:06
- Location: New Zealand
- Contact:
Re: cobra 148 gtl no tx in am rx ok.
Do you have the exact circuit diagram for the radio, I do not have a very good one for the KEPC-332, it is only just readable in places.
I would say to check (in order) R41, TR42 and the 220 Ohm 2W resistor, it looks like it is either R193 or R183 (I cant make it out), VR10, C174, R228, R194, C173.
I would say to check (in order) R41, TR42 and the 220 Ohm 2W resistor, it looks like it is either R193 or R183 (I cant make it out), VR10, C174, R228, R194, C173.
-
- Heavy User
- Posts: 228
- Joined: Monday 12th Nov 2007, 0:47
- Location: canada
Re: cobra 148 gtl no tx in am rx ok.
did you check the mode switch? i know it sounds simple...but