Texas Ranger696 Base No sound
Posted: Tuesday 16th Aug 2016, 23:13
Texas ranger 696 SSB base
PCB EPT069610Z
PLL ?
Symptom are no sound at all RX/PA/Talkback nothing
I have movement from my RX needle and have confirmed this while talking over the phone to a fellow CBer.
I also have good TX
I have looked inside the radio for any lose wiring or disconnected wires but found nothing like tat.
I don't know when this happened I turned my radio on and just have no sound now.
Any help would greatly be appreciated.
Thanks !
PCB EPT069610Z
PLL ?
Symptom are no sound at all RX/PA/Talkback nothing
I have movement from my RX needle and have confirmed this while talking over the phone to a fellow CBer.
I also have good TX
I have looked inside the radio for any lose wiring or disconnected wires but found nothing like tat.
I don't know when this happened I turned my radio on and just have no sound now.
Any help would greatly be appreciated.
Thanks !