TC9103 PLL Frequency Synthesizer

Overview

This PLL-circuit use a 6 bit BCD binary programmable divide-by-N counter.

Down-converting of the frequency to the divider

This PLL Circuit use a Mixer and a X-Tal Oscillator to convert the output frequency f OUT to the f IN to the PLL Circuit.
The X-Tal frequency is f XTAL = f OUT - f IN
The output frequency can be changed by changing the mixing-xtal or add a new mixing-xtal to the oscillator.
PinNameDescription
1VccPositive Supply Voltage
2RIReferency Oscillator Input
3ROReferency Oscillator Output
41/2 RReference OSC frequency divide by 2 output
5PDPhase Detector Output
6AIAmp. Input
7AOAmp. Output
8LDLoop Detect - Unlocked=LOW Locked=HIGH
9T/RTransmit=HIGH Receive=low
10P5Programmable input 5
11P4Programmable input 4
12P3Programmable input 3
13P2Programmable input 2
14P1Programmable input 1
15P1Programmable input 0
16Connect to GND
17F inVCO Frequency Input
18GNDGround

This counter shows the number of hits since the 29th January 2000

Go Back To The Components Page

Go Back To The Main Home Page


Copyright © The Defpom 1997-2008

https://www.radiomods.co.nz/