Modifications for the Kenwood TR-7900

TR-7800/TR-9000 Optional Ceramic Filters


10-10-80


FM Adjacent channel rejection in either unit may be improved by installing an optional narrow ceramic filter.
Filter    Part No.       -6db Bandwidth -70db Bandwidth Retail
CFK-455F  L72-0304-05    +/- 6 kHz      +/- 12 kHz     $ 33.50
CFK-455G  (CFK-455G)*    +/- 4 kHz      +/- 10 kHz     $ 33.50
* Not original part. No computer part number.

Location:
TR-7800, RX unit X55-1270-10 part, L10
TR-9000, RX unit X55-1260-11 part, CF1
To install, desolder the original filter and clear the second set of holes for the optional filter. Solder the new filter in place. Be sure all pins are actually soldered, and that there are no solder bridges between pins or across the printed circuit board. Clip the pins flush to the board, and reinstall the circuit board.

Note: Squelch operation will vary from unit to unit with an optional narrow filter. Tighter coupling from the detector to the squelch circuit may be tried to restore "original feel".


Go Back To The Kenwood Mods Page

Go Back To The Main Modifications Page

Go Back To The CB / HAM Radio Main Page

Go Back To The Main Home Page


Copyright © The Defpom 1997-2008

http://www.radiomods.co.nz/