Page 1 of 1

Cobra 29 No RX / No TX / PA OK

Posted: Monday 3rd Mar 2014, 20:52
by Bird_Dog
Radio Make and Model: Cobra 29 NW ST Manufacture 10/99
PCB Number: KEPC-255-D
PLL Number: NP'C 9605
Test gear available: Fluke VOM
Symptoms: No RX, no TX, no meter movment when Mic keyed - Mic brand new from Cobra

What is working: PA output, Lights, Dimmer, ST switch, Channel selector and LED, TX light when Mic keyed

What has been tried: Tested TR 15 OK Tested TR 14 OK / Used 50 ohm dummy load for TX testing

Did it suddenly happen ?: Purchased like this, Owner stated they did not know if unit was working :oops:
Anything else that may be of help?: