Hi all.
After some time of not getting swiched on my realistic pro 2006 scanner has developed a strange fault. Every 2 seconds or so the damn thing keeps on beeping and it has a batt thing flashing on the display all the time.I have put a new 9 volt battery in but made no difference at all.
Please can anyone help me solve this problem...
Thank's for any help i may or may not get.
pro 2006
2006
Hi, 2mnths odd out of date but try this site most of the dwn loads still func.
http://www.repeater-builder.com/radio-s ... index.html
http://www.repeater-builder.com/radio-s ... index.html
Re: pro 2006
hello. how u find realistic pro 2006 scanner. is it oK. what is the price and tell us about the features of this scanner
-
- Newbie
- Posts: 8
- Joined: Thursday 21st Jan 2010, 11:31
- First Name: Mike
- Location: Christchurch, South Coast UK
Re: pro 2006
I know this is an old thread but in case anyone finds it searching for the same symptoms, I found the cure. Simply replace the batteries, then RESET to Factory Defaults - Both Realistic Pro's I've owned are reset by holding the 2 and 9 buttons down then turn on - you will lose all stored frequencies and custom settings unfortunately but at least the BATT LO problem is sorted. HTH someone.
- The Defpom
- Site Admin
- Posts: 436
- Joined: Friday 20th Aug 2004, 18:06
- Location: New Zealand
- Contact:
Re: pro 2006
Hi, Thanks for the info on how to resolve the issue, I am sure that it will be of help to someone who comes looking for info on the same fault.Tipsy wrote:I know this is an old thread but in case anyone finds it searching for the same symptoms, I found the cure. Simply replace the batteries, then RESET to Factory Defaults - Both Realistic Pro's I've owned are reset by holding the 2 and 9 buttons down then turn on - you will lose all stored frequencies and custom settings unfortunately but at least the BATT LO problem is sorted. HTH someone.
Re: pro 2006
hello. how u find realistic pro 2006 scanner. is it oK. what is the price and tell us about the features of this scanner.............
leather jackets http://www.leather4sure.com/
a2 flight jacket http://www.leather4sure.com/a2-flight-jackets.html
biker jacket men http://www.leather4sure.com/biker-motor ... ets-1.html
black leather vest http://www.leather4sure.com/black-leather-vests.html
braided leather belt http://www.leather4sure.com/braided-leather-belts.html
a2 flight jacket http://www.leather4sure.com/a2-flight-jackets.html
biker jacket men http://www.leather4sure.com/biker-motor ... ets-1.html
black leather vest http://www.leather4sure.com/black-leather-vests.html
braided leather belt http://www.leather4sure.com/braided-leather-belts.html
-
- Newbie
- Posts: 3
- Joined: Thursday 5th Dec 2013, 23:18
- First Name: Corbin
- Location: India
Re: pro 2006
Just reset it to factory defaults. Make sure there is no more pending works in the printer. If there is something left then reset the work or stops printing completely. This should work I guess. If this doesn’t work then god knows what will.
----------------------------------
CORBIN GRAVELY
----------------------------------
CORBIN GRAVELY