Channel/RF readout display for Uniden Pro 640e

Exit_Thirteen · Post by **Exit_Thirteen** » Thursday 22nd May 2008, 19:45

I believe someone may have previously posted that was looking for one of these, but can't be sure...

I have a Uniden Pro 640e AM/SSB mobile radio that works great, but the some of the segments on the channel readout are burned out, and the channel/meter readout is all one sealed unit. Uniden quit making these some time ago, so if anyone has a junk Pro 640e or a good display, please let me know. Thanks in advance!

Regards,
Rick (Triple 7)

GRTS · Post by **GRTS** » Friday 23rd May 2008, 3:01

Are you able to post a picture of what the display itself looks like? Oddly enough I still have a few displays around from the old repair shop days. It's possible I might have the one you need.

Exit_Thirteen · Post by **Exit_Thirteen** » Friday 23rd May 2008, 8:15

Sure thing, GRTS... I'll get a pic up... it's a slightly fuzzy, though.

The display from a Uniden Pro 540e (the AM only version of the 640e) has the same display in it also. So a 640e or 540e display will work. Here's a couple pics.

[/img]

GRTS · Post by **GRTS** » Friday 23rd May 2008, 10:00

I think you might be in luck. Give me a few days to dig through some boxes at home and if you don't hear from me by Tues/Weds, then give this thread a bump.

Exit_Thirteen · Post by **Exit_Thirteen** » Friday 23rd May 2008, 15:41

Most excellent, thanks for taking the time to look! I'll keep this updated as needed. Cheers!

Regards,
Rick (Triple 7)

GRTS · Post by **GRTS** » Thursday 29th May 2008, 3:04

Exit_Thirteen:

I have the display shown in the pictures below.
It is brand new and still has the clear plastic from the factory on the front face for protection.
Send me a PM and let me know what you feel it's worth.
I'll pay the shipping to you.

-Ray

Exit_Thirteen · Post by **Exit_Thirteen** » Thursday 29th May 2008, 11:00

That's super!

Unfortunately, I'm not able to PM anyone, as only admins, moderators, and technical helpers are the only people that can PM, per Scott (The Defpom). If you'd drop me a quick email at Bander_moth@hotmail.com, I can discuss this with you in that manner. Thank you!

-Exit

GRTS · Post by **GRTS** » Friday 30th May 2008, 3:15

email sent.

Exit_Thirteen · Post by **Exit_Thirteen** » Friday 30th May 2008, 15:29

Thanks GRTS, this will be taken care of, case closed. Success!

-Exit

speedracer6g · Post by **speedracer6g** » Sunday 1st Jun 2008, 11:44

hey I may need one of those also. I had one in the shop a few monthes ago and couldnt find one anywhere. Do you have any left???

MIKE

pm me if you do.

thanks,

mike

hamguy2 · Post by **hamguy2** » Thursday 23rd Oct 2008, 21:31

im in australia i maybe able to help you