I have a RTX president jackson 1st version..
someone can tell me the correct range value
for the bias current on 2sc2166 and MRF477 ???
When i have change the curren on 2SC2166 from 12ma to 40ma,
the transistor is dead.
I have the service manual and it says :
MRF477 trimmer VR9 80ma.
2SC2166 trimmer VR10 50ma .
May you tell me also the correct bias for this 3 conditions, please ?!
2sc2166 + MRF477, and
2SC2166 + 2SC1969 or
2SC1969 + 2SC1969 .
Please HELP Me !! thanks a lot ..
Regards
Alex (italy)