Mod 4 Icom 730
Posted: Wednesday 21st Jun 2006, 17:30
I have recently acquired an IC730 and wish to put 27MHz in it.
It is not a general coverage receive radio and doesnt go there on receive so I will need to do a little more than cut the wire on the rf board.
The problem is i dont know exactly what is required.
If you know how or can find out how for me and tell me here i would owe ya one.
Cheers all, Daz In Auz.
It is not a general coverage receive radio and doesnt go there on receive so I will need to do a little more than cut the wire on the rf board.
The problem is i dont know exactly what is required.
If you know how or can find out how for me and tell me here i would owe ya one.
Cheers all, Daz In Auz.